ביטויי switch
חלק מהיחידה יסודות C# ו-.NET במסלול ה-ASP.NET Core של Coddy. שיעור 15 מתוך 20.
ביטוי switch בוחר ערך באמצעות התאמת תבניות. הערך מופיע ראשון, אחריו switch, ואז זרועות בתבנית pattern => result, המופרדות בפסיקים. הזרועות נבדקות מלמעלה למטה, וההתאמה הראשונה היא שקובעת. _ מתאים לכל דבר, ולכן הוא מופיע אחרון:
var text = status switch
{
200 => "OK",
404 => "Not Found",
>= 500 => "Server Error",
_ => "Other",
};בלי _, המהדר מזהיר (CS8509) שחלק מהערכים אינם מתאימים לאף זרוע, וערך כזה גורם לחריגה מסוג SwitchExpressionException בזמן ריצה. פקודת switch מריצה קוד עבור כל מקרה; ביטוי switch מפיק ערך שאפשר לשמור או להדפיס.
אתגר
קלהוסף פקודת help שמסבירה כל פקודה, באמצעות ביטוי switch.
- הוסף
case "help":מעלdefault:. הנושא הואargs[1], או""אם אין כזה. - הגדר את
helpבאמצעות ביטוי switch על הנושא, עם זרוע אחת בכל שורה למטה, ואז הדפס אותו:"" Type help <command>, such as help add. "add" add <name> <amount> [category]: saves an expense "remove" remove <name>: deletes the first expense with that name "list" list [category]: shows the saved expenses "top" top [n]: shows the n biggest expenses, 3 by default "categories" categories: shows the total of each category - הזרוע האחרונה,
_, מחזירהNo help for fly.כאשר הנושא מופיע במקוםfly.
נסה זאת: הטרמינל שלצד העורך כבר מציג dotnet run -- help add, אז לחץ על הרצה: add <name> <amount> [category]: saves an expense. שנה את הארגומנטים ל-help fly ולחץ שוב על הרצה: No help for fly. עם help בלבד תראה Type help <command>, such as help add.
נסו בעצמכם
using System.Globalization;
using System.Text.Json;
var file = "expenses.json";
var expenses = new List<Expense>();
if (File.Exists(file))
{
expenses = JsonSerializer.Deserialize<List<Expense>>(File.ReadAllText(file)) ?? new List<Expense>();
}
var budgets = new Dictionary<string, decimal>();
if (File.Exists("budgets.json"))
{
budgets = JsonSerializer.Deserialize<Dictionary<string, decimal>>(File.ReadAllText("budgets.json")) ?? new Dictionary<string, decimal>();
}
var count = expenses.Count;
var total = expenses.Sum(e => e.Amount);
if (args.Length == 0)
{
Console.WriteLine("Expense Tracker");
Console.WriteLine($"{count} expenses");
Console.WriteLine($"Total: {total:F2}");
}
else
{
switch (args[0])
{
case "add":
if (args.Length < 3)
{
Console.Error.WriteLine("Usage: add <name> <amount> [category]");
return 1;
}
if (!decimal.TryParse(args[2], CultureInfo.InvariantCulture, out var amount))
{
Console.Error.WriteLine($"Invalid amount: {args[2]}");
return 1;
}
if (amount is <= 0 or > 10000)
{
Console.Error.WriteLine("The amount must be more than 0 and at most 10000.");
return 1;
}
var category = args.Length > 3 ? args[3] : "other";
var expense = new Expense(args[1], amount, category);
expenses.Add(expense);
File.WriteAllText(file, JsonSerializer.Serialize(expenses));
Console.WriteLine($"Added {expense.Name}: {expense.Amount:F2} ({expense.Category})");
if (budgets.TryGetValue(category, out var limit))
{
var spent = expenses.Where(e => e.Category == category).Sum(e => e.Amount);
if (spent > limit)
{
Console.WriteLine($"Over budget for {category}: {spent:F2} of {limit:F2}");
}
}
break;
case "remove":
if (args.Length < 2)
{
Console.Error.WriteLine("Usage: remove <name>");
return 1;
}
Expense? match = expenses.Find(e => e.Name == args[1]);
if (match is null)
{
Console.Error.WriteLine($"No expense named {args[1]}.");
return 1;
}
expenses.Remove(match);
File.WriteAllText(file, JsonSerializer.Serialize(expenses));
Console.WriteLine($"Removed {match.Name}: {match.Amount:F2}");
break;
case "list":
var shown = args.Length > 1 ? expenses.Where(e => e.Category == args[1]).ToList() : expenses;
if (shown.Count == 0)
{
Console.WriteLine("No expenses.");
break;
}
foreach (var line in shown.Select(e => $"{e.Name}: {e.Amount:F2} ({e.Category})"))
{
Console.WriteLine(line);
}
break;
case "top":
var howMany = 3;
if (args.Length > 1 && !int.TryParse(args[1], out howMany))
{
Console.Error.WriteLine($"Invalid number: {args[1]}");
return 1;
}
var biggest = expenses.OrderByDescending(e => e.Amount).Take(howMany);
foreach (var line in biggest.Select((e, i) => $"{i + 1}. {e.Name}: {e.Amount:F2} ({e.Category})"))
{
Console.WriteLine(line);
}
break;
case "categories":
var groups = expenses.GroupBy(e => e.Category).OrderByDescending(g => g.Sum(e => e.Amount));
foreach (var g in groups)
{
Console.WriteLine($"{g.Key}: {g.Sum(e => e.Amount):F2} ({g.Count()})");
}
break;
default:
Console.Error.WriteLine($"Unknown command: {args[0]}");
return 1;
}
}
return 0;
השיעור הזה כולל חידון קצר. התחילו את השיעור כדי לענות עליו ולעקוב אחרי ההתקדמות.