Menu
CoddyTech

Wyrażenia switch

Część sekcji Podstawy C# i .NET ścieżki ASP.NET Core w Coddy. Lekcja 15 z 20.

Wyrażenie switch wybiera wartość przez dopasowanie wzorców. Najpierw podaje się wartość, potem switch, a następnie ramiona w postaci pattern => result, oddzielone przecinkami. Ramiona są sprawdzane od góry do dołu, a pierwsze dopasowanie wygrywa. _ pasuje do wszystkiego, dlatego umieszcza się je na końcu:

var text = status switch
{
    200 => "OK",
    404 => "Not Found",
    >= 500 => "Server Error",
    _ => "Other",
};

Bez _ kompilator ostrzega (CS8509), że niektóre wartości nie mają odpowiadającego im ramienia, a taka wartość powoduje zgłoszenie wyjątku SwitchExpressionException w czasie wykonywania. Instrukcja switch wykonuje kod dla każdego przypadku; wyrażenie switch zwraca wartość, którą można zapisać lub wyświetlić.

challenge icon

Wyzwanie

Łatwy

Dodaj polecenie help, które objaśnia każde polecenie, używając wyrażenia switch.

  1. Dodaj case "help": przed default:. Tematem jest args[1] albo "", jeśli go nie podano.
  2. Ustaw help za pomocą wyrażenia switch dla tematu, z jedną gałęzią na każdy wiersz poniżej, a następnie go wypisz:
    ""            Type help <command>, such as help add.
    "add"         add <name> <amount> [category]: saves an expense
    "remove"      remove <name>: deletes the first expense with that name
    "list"        list [category]: shows the saved expenses
    "top"         top [n]: shows the n biggest expenses, 3 by default
    "categories"  categories: shows the total of each category
  3. Ostatnia gałąź, _, zwraca No help for fly., podstawiając temat zamiast fly.

Wypróbuj: terminal obok edytora zawiera już polecenie dotnet run -- help add, więc naciśnij „Uruchom”: add <name> <amount> [category]: saves an expense. Zmień argumenty na help fly i ponownie naciśnij „Uruchom”: No help for fly. Po wpisaniu samego help zobaczysz Type help <command>, such as help add.

Spróbuj swoich sił

using System.Globalization;
using System.Text.Json;

var file = "expenses.json";
var expenses = new List<Expense>();
if (File.Exists(file))
{
    expenses = JsonSerializer.Deserialize<List<Expense>>(File.ReadAllText(file)) ?? new List<Expense>();
}
var budgets = new Dictionary<string, decimal>();
if (File.Exists("budgets.json"))
{
    budgets = JsonSerializer.Deserialize<Dictionary<string, decimal>>(File.ReadAllText("budgets.json")) ?? new Dictionary<string, decimal>();
}
var count = expenses.Count;
var total = expenses.Sum(e => e.Amount);

if (args.Length == 0)
{
    Console.WriteLine("Expense Tracker");
    Console.WriteLine($"{count} expenses");
    Console.WriteLine($"Total: {total:F2}");
}
else
{
    switch (args[0])
    {
        case "add":
            if (args.Length < 3)
            {
                Console.Error.WriteLine("Usage: add <name> <amount> [category]");
                return 1;
            }
            if (!decimal.TryParse(args[2], CultureInfo.InvariantCulture, out var amount))
            {
                Console.Error.WriteLine($"Invalid amount: {args[2]}");
                return 1;
            }
            if (amount is <= 0 or > 10000)
            {
                Console.Error.WriteLine("The amount must be more than 0 and at most 10000.");
                return 1;
            }
            var category = args.Length > 3 ? args[3] : "other";
            var expense = new Expense(args[1], amount, category);
            expenses.Add(expense);
            File.WriteAllText(file, JsonSerializer.Serialize(expenses));
            Console.WriteLine($"Added {expense.Name}: {expense.Amount:F2} ({expense.Category})");
            if (budgets.TryGetValue(category, out var limit))
            {
                var spent = expenses.Where(e => e.Category == category).Sum(e => e.Amount);
                if (spent > limit)
                {
                    Console.WriteLine($"Over budget for {category}: {spent:F2} of {limit:F2}");
                }
            }
            break;
        case "remove":
            if (args.Length < 2)
            {
                Console.Error.WriteLine("Usage: remove <name>");
                return 1;
            }
            Expense? match = expenses.Find(e => e.Name == args[1]);
            if (match is null)
            {
                Console.Error.WriteLine($"No expense named {args[1]}.");
                return 1;
            }
            expenses.Remove(match);
            File.WriteAllText(file, JsonSerializer.Serialize(expenses));
            Console.WriteLine($"Removed {match.Name}: {match.Amount:F2}");
            break;
        case "list":
            var shown = args.Length > 1 ? expenses.Where(e => e.Category == args[1]).ToList() : expenses;
            if (shown.Count == 0)
            {
                Console.WriteLine("No expenses.");
                break;
            }
            foreach (var line in shown.Select(e => $"{e.Name}: {e.Amount:F2} ({e.Category})"))
            {
                Console.WriteLine(line);
            }
            break;
        case "top":
            var howMany = 3;
            if (args.Length > 1 && !int.TryParse(args[1], out howMany))
            {
                Console.Error.WriteLine($"Invalid number: {args[1]}");
                return 1;
            }
            var biggest = expenses.OrderByDescending(e => e.Amount).Take(howMany);
            foreach (var line in biggest.Select((e, i) => $"{i + 1}. {e.Name}: {e.Amount:F2} ({e.Category})"))
            {
                Console.WriteLine(line);
            }
            break;
        case "categories":
            var groups = expenses.GroupBy(e => e.Category).OrderByDescending(g => g.Sum(e => e.Amount));
            foreach (var g in groups)
            {
                Console.WriteLine($"{g.Key}: {g.Sum(e => e.Amount):F2} ({g.Count()})");
            }
            break;
        default:
            Console.Error.WriteLine($"Unknown command: {args[0]}");
            return 1;
    }
}
return 0;
quiz iconSprawdź się

Ta lekcja zawiera krótki quiz. Zacznij lekcję, żeby na niego odpowiedzieć i śledzić swoje postępy.

Wszystkie lekcje w sekcji Podstawy C# i .NET