Functions: MIN, MAX, LIMIT
Part of the Structured Text section of Coddy's PLC Programming journey. Lesson 13 of 17.
A function takes values and gives one back, right inside an expression. Unlike a block it keeps nothing between scans, so it needs no VAR line:
MAX(a, b): the larger value.MIN(a, b): the smaller.LIMIT(MN, IN, MX): IN, but never below MN or above MX.ABS(x): x without its minus sign.
Speed := LIMIT(0, Setpoint, 100);
Gap := ABS(Level - Target);MAX with 0 is a floor: MAX(x, 0) is x, but never below 0.
Challenge
EasyThe display shows how many boxes are still needed for a batch of 6, but after the sixth box it goes below zero. Fix it with a function so it stops at 0.
Press Run, try it on the machine, then Check.
Try it yourself
VAR
C1 : CTU;
END_VAR
Belt := (Start OR Belt) AND Stop;
C1(CU := Entry, PV := 6);
// Boxes still needed for a batch of 6
Display := 6 - C1.CV;
All lessons in Structured Text
Practice on your own: PLC playground