Tally by Size
Part of the Counters and Numbers section of Coddy's PLC Programming journey. Lesson 16 of 17.
The shift report wants two numbers: how many tall boxes and how many short ones. Keep each in an INT tag and add 1 per box, with a P contact so each box counts once.
Tall boxes are easy: one rising edge of Tall each. Short ones have no sensor of their own. But now that sorting works, every tall box leaves the belt before the end, so every box that reaches the Eye is a short one.
Challenge
MediumMake two INT tags, TallBoxes and ShortBoxes. Add 1 to TallBoxes for each tall box and 1 to ShortBoxes for each short box.
Try it yourself
{"v":1,"lang":"ld","tags":[{"name":"Wait","type":"BOOL"},{"name":"C1","type":"CTU"},{"name":"T1","type":"TON"},{"name":"T2","type":"TP"}],"rungs":[{"els":[{"t":"par","branches":[[{"t":"no","tag":"Start"}],[{"t":"no","tag":"Belt"}]]},{"t":"no","tag":"Stop"},{"t":"nc","tag":"C1.Q"},{"t":"coil","tag":"Belt"}]},{"els":[{"t":"no","tag":"Belt"},{"t":"coil","tag":"Lamp"}]},{"els":[{"t":"no","tag":"Eye"},{"t":"CTU","inst":"C1","pv":6,"r":"Start"}]},{"els":[{"t":"move","src":"C1.CV","dst":"Display"}]},{"els":[{"t":"par","branches":[[{"t":"p","tag":"Tall"}],[{"t":"no","tag":"Wait"}]]},{"t":"nc","tag":"T1.Q"},{"t":"coil","tag":"Wait"}]},{"els":[{"t":"no","tag":"Wait"},{"t":"TON","inst":"T1","pt":"T#2400ms"}]},{"els":[{"t":"no","tag":"T1.Q"},{"t":"TP","inst":"T2","pt":"T#300ms"},{"t":"coil","tag":"Pusher"}]}]}All lessons in Counters and Numbers
3Project: Sorting Conveyor
Run the BeltCount the BoxesA Batch of SixStop at the EndSpot Tall BoxesPush at the Right TimeTally by SizeJam AlarmPractice on your own: PLC playground