The Display
Part of the Counters and Numbers section of Coddy's PLC Programming journey. Lesson 9 of 17.
This is the sorting conveyor you will program next. Beside its panel is a four digit display, wired to the output Display. It is not a BOOL: it is an INT output, and it shows whatever number the program writes to it.
A counter's CV is an INT too, so one MOVE puts the count on the display:
The MOVE rung has no contact, so it has power on every scan and the display always shows the latest count. Do not put the MOVE after the counter on the same rung: the power there is the counter's Q, which stays FALSE until CV reaches PV.
Challenge
EasyBefore the belt runs, test the display. Count presses of Start with a CTU (PV 9999), and MOVE its CV to Display on a rung of its own.
Try it yourself
{"v":1,"lang":"ld","tags":[],"rungs":[{"els":[]}]}This lesson includes a short quiz. Start the lesson to answer it and track your progress.
All lessons in Counters and Numbers
Practice on your own: PLC playground