Pulse or Delay?
Part of the Timers section of Coddy's PLC Programming journey. Lesson 8 of 18.
Three timers, three jobs. Pick by asking what the output should do:
- start late, after the input has been on a while:
TON - stop late, a while after the input turns off:
TOF - last a fixed time, whatever the input does:
TP
Drawn on a timing diagram the three look different: the TON output starts late, the TOF output ends late, and the TP output is always the same width.
Challenge
EasyPut the right timer on each rung:
Horn: a 0.5 s beep on each press of PB1Amber: lit with PB1, and 4 s after it is releasedGreen: lit once SW1 has been on for 2 s
Try it yourself
{"v":1,"lang":"ld","tags":[],"rungs":[{"els":[{"t":"no","tag":"PB1"},{"t":"coil","tag":"Horn"}]},{"els":[{"t":"no","tag":"PB1"},{"t":"coil","tag":"Amber"}]},{"els":[{"t":"no","tag":"SW1"},{"t":"coil","tag":"Green"}]}]}This lesson includes a short quiz. Start the lesson to answer it and track your progress.
All lessons in Timers
4Project: Pedestrian Crossing
Green Until PressedAmber Before RedRed and WalkClear the CrossingThe Wait LampNight ModePractice on your own: PLC playground