Menu
CoddyTech

Red and Walk

Part of the Timers section of Coddy's PLC Programming journey. Lesson 15 of 18.

Once the cars have red, the walkers may cross. Walk lights with red and stays lit for a fixed time. A second timer, started by the first, measures it:

When the walk time is over, the request is done: T2.Q resets Req, the timers reset, and the cars get green again.

The rule that keeps people safe: Walk must never be lit while the cars have green or amber. The checks watch for that on every scan.

challenge icon

Challenge

Medium

When Red lights, light Walk for 5 s (DontWalk goes out). When the 5 s are over, reset Req so the cars get Green again.

Try it yourself

{"v":1,"lang":"ld","tags":[{"name":"Req","type":"BOOL"},{"name":"T1","type":"TON"}],"rungs":[{"els":[{"t":"no","tag":"WalkButton"},{"t":"set","tag":"Req"}]},{"els":[{"t":"no","tag":"Req"},{"t":"TON","inst":"T1","pt":"T#3s"}]},{"els":[{"t":"nc","tag":"Req"},{"t":"coil","tag":"Green"}]},{"els":[{"t":"no","tag":"Req"},{"t":"nc","tag":"T1.Q"},{"t":"coil","tag":"Amber"}]},{"els":[{"t":"no","tag":"T1.Q"},{"t":"coil","tag":"Red"}]},{"els":[{"t":"nc","tag":"Walk"},{"t":"coil","tag":"DontWalk"}]}]}

All lessons in Timers

Practice on your own: PLC playground