The Pulse Timer
Part of the Timers section of Coddy's PLC Programming journey. Lesson 6 of 18.
The pulse timer, TP, gives a pulse of a fixed length. When IN turns on, Q turns on for exactly PT, then off.
While the pulse runs, TP ignores its input: letting go early does not cut it short, and holding on does not make it longer. A new pulse needs a new press once the last one is over.
Use it when the length must not depend on the operator: a 1 s beep, a 2 s squirt of oil.
Challenge
EasyMake every press of PB1 sound the Horn for exactly 1 s, however short or long the press. Use a TP.
Try it yourself
{"v":1,"lang":"ld","tags":[],"rungs":[{"els":[]}]}All lessons in Timers
4Project: Pedestrian Crossing
Green Until PressedAmber Before RedRed and WalkClear the CrossingThe Wait LampNight ModePractice on your own: PLC playground