AND: Contacts in Series
Part of the First Rungs section of Coddy's PLC Programming journey. Lesson 6 of 20.
Put two contacts one after the other, in series, and power gets through only when both pass it. That is a logical AND.
A two-hand start builds on this: the operator must press two buttons at once, so both hands are away from the moving parts. Real two-hand controls also check that both were pressed within half a second, and use a safety relay.
Challenge
EasyLight Green only while PB1 and PB2 are both held.
Try it yourself
{"v":1,"lang":"ld","tags":[],"rungs":[{"els":[]}]}All lessons in First Rungs
2Contacts
Normally Closed ContactsAND: Contacts in SeriesOR: Contacts in ParallelSwitches Stay PutAND with ORNeither ButtonPractice on your own: PLC playground