Menu
CoddyTech

Inputs Have Addresses

Part of the First Rungs section of Coddy's PLC Programming journey. Lesson 3 of 20.

Every input and output is wired to a terminal on the PLC, and every terminal has an address. In IEC 61131-3, the standard most PLCs follow:

  • %IX0.2: an Input, one bit (X), byte 0, bit 2
  • %QX0.3: an output (Q), byte 0, bit 3

Nobody wants to remember addresses, so each one gets a tag, a name like PB3 or Blue. The I/O table under the machine shows both. Brands write addresses differently, but the idea is the same everywhere.

challenge icon

Challenge

Easy

Open the I/O table. Find the input wired to %IX0.2 and the output wired to %QX0.3, then write a rung so that input lights that output.

Try it yourself

{"v":1,"lang":"ld","tags":[],"rungs":[{"els":[]}]}

All lessons in First Rungs

Practice on your own: PLC playground