The Run Lamp
Part of the First Rungs section of Coddy's PLC Programming journey. Lesson 15 of 20.
Operators need to see what a machine is doing. A green run lamp says the motor is running.
Drive it from the output itself, not from the Start button. Start is pressed for a moment; the Motor tag is TRUE for as long as the PLC runs the motor.
Challenge
EasyLight RunLamp while the motor runs.
Try it yourself
{"v":1,"lang":"ld","tags":[],"rungs":[{"els":[{"t":"par","branches":[[{"t":"no","tag":"Start"}],[{"t":"no","tag":"Motor"}]]},{"t":"no","tag":"Stop"},{"t":"no","tag":"Overload"},{"t":"coil","tag":"Motor"}]}]}All lessons in First Rungs
3The Motor Station
Meet the MotorWhy Stop Is Wired NCThe Seal-InThe Overload RelayThe Run LampThe Fault LampPractice on your own: PLC playground