The Seal-In
Part of the First Rungs section of Coddy's PLC Programming journey. Lesson 13 of 20.
Nobody holds a button all day. Real motors start with a press and keep running: a seal-in. Put a contact of the motor's own output in parallel with Start:
Press Start and the coil turns on. On the next scan the Motor contact is closed too, so power keeps flowing after Start is released. Pressing Stop breaks the path, the coil turns off, and the seal opens.
Challenge
EasyKeep the motor running after Start is released, until Stop is pressed.
Try it yourself
{"v":1,"lang":"ld","tags":[],"rungs":[{"els":[{"t":"no","tag":"Start"},{"t":"no","tag":"Stop"},{"t":"coil","tag":"Motor"}]}]}All lessons in First Rungs
3The Motor Station
Meet the MotorWhy Stop Is Wired NCThe Seal-InThe Overload RelayThe Run LampThe Fault LampPractice on your own: PLC playground