Menu
CoddyTech

Forward and Reverse

Part of the Latches, Edges and Interlocks section of Coddy's PLC Programming journey. Lesson 11 of 20.

This motor runs both ways. It has two contactors: MotorFwd connects the motor so it turns forward, and MotorRev swaps two of its three phases so it turns in reverse. Each direction has its own button, Fwd and Rev.

Each direction is like a motor of its own: its own seal-in, with Stop and the overload in series.

The two contactors must never close together. For now, press Stop before you change direction; the next lesson makes the program enforce it.

challenge icon

Challenge

Easy

Rung 1 runs the motor forward. Add rung 2 so Rev runs it in reverse, with its own seal-in. Stop and Overload stop it too.

Try it yourself

{"v":1,"lang":"ld","tags":[],"rungs":[{"els":[{"t":"par","branches":[[{"t":"no","tag":"Fwd"}],[{"t":"no","tag":"MotorFwd"}]]},{"t":"no","tag":"Stop"},{"t":"no","tag":"Overload"},{"t":"coil","tag":"MotorFwd"}]},{"els":[]}]}

All lessons in Latches, Edges and Interlocks

Practice on your own: PLC playground