The One-Button Toggle
Part of the Latches, Edges and Interlocks section of Coddy's PLC Programming journey. Lesson 9 of 20.
A toggle is one button that flips an output: press once, on; press again, off. It needs two things:
- an edge, so one press is one flip. Without it, the lamp flips on every scan while the button is held
- a memory bit that holds the edge, so the next rung can read it with a normally open and a normally closed contact
Read rung 2. A pulse with Green off: the top path turns Green on. No pulse with Green on: the bottom path holds it, like a seal-in. A pulse with Green on: neither path passes power, so Green turns off.
Challenge
MediumMake PB1 toggle Green:
- create a BOOL memory bit
Pulse - rung 1: a rising edge on PB1 writes Pulse
- rung 2: the toggle rung from the theory
Try it yourself
{"v":1,"lang":"ld","tags":[],"rungs":[{"els":[]}]}All lessons in Latches, Edges and Interlocks
Practice on your own: PLC playground