Menu
CoddyTech

The RS Latch

Part of the Latches, Edges and Interlocks section of Coddy's PLC Programming journey. Lesson 6 of 20.

The RS box is the mirror of SR. Its S input takes the rung's power and sets, its R1 input resets, and when both are TRUE the reset wins: it is reset dominant.

Start and stop logic uses RS for safety. If Start sticks, or someone presses both buttons, the machine must stop. With SR it would keep running.

On this panel PB2 is a plain button: it reads TRUE while pressed, so it goes straight into R1.

challenge icon

Challenge

Easy

Run a conveyor, shown by Green: PB1 starts it and PB2 stops it. Use an RS box, so Stop wins when both buttons are held.

Try it yourself

{"v":1,"lang":"ld","tags":[],"rungs":[{"els":[]}]}
quiz iconTest yourself

This lesson includes a short quiz. Start the lesson to answer it and track your progress.

All lessons in Latches, Edges and Interlocks

Practice on your own: PLC playground