Menu
CoddyTech

The Safety Beam

Part of the Latches, Edges and Interlocks section of Coddy's PLC Programming journey. Lesson 19 of 20.

A door must never come down on a car. A light beam crosses the doorway low down. Beam is wired like Stop: TRUE while the beam is clear, FALSE while a car breaks it.

Two changes make the door safe:

  • a normally open Beam contact on the down rung, so a blocked beam stops the door
  • a path with a normally closed Beam beside Open, so a blocked beam opens it again

For one scan the up rung waits, because the interlock still sees MotorDown on. The down rung drops it, and on the next scan the door starts back up.

challenge icon

Challenge

Medium

Protect the car: with a car in the doorway the door must not close, and if a car drives in while it closes, it stops and opens again. Test it with Car in the doorway on the machine.

Try it yourself

{"v":1,"lang":"ld","tags":[],"rungs":[{"els":[{"t":"par","branches":[[{"t":"no","tag":"Open"}],[{"t":"no","tag":"MotorUp"}]]},{"t":"no","tag":"Stop"},{"t":"nc","tag":"UpLimit"},{"t":"nc","tag":"MotorDown"},{"t":"coil","tag":"MotorUp"}]},{"els":[{"t":"par","branches":[[{"t":"no","tag":"Close"}],[{"t":"no","tag":"MotorDown"}]]},{"t":"no","tag":"Stop"},{"t":"nc","tag":"DownLimit"},{"t":"nc","tag":"MotorUp"},{"t":"coil","tag":"MotorDown"}]}]}

All lessons in Latches, Edges and Interlocks

Practice on your own: PLC playground