The R_TRIG Block
Part of the Latches, Edges and Interlocks section of Coddy's PLC Programming journey. Lesson 10 of 20.
The edge contacts have a box form too. R_TRIG (rising trigger) gives a one-scan pulse on its Q output when the power on its left goes from FALSE to TRUE. F_TRIG (falling trigger) does the same when that power goes away.
Like every box, each one has an instance name, here E1, that holds its memory. A box takes the power of everything to its left, not just one tag, and it is how edges are written in Structured Text later.
One trap: an F_TRIG whose input starts FALSE gives a pulse on the very first scan.
Challenge
EasyRung 2 toggles Blue from Pulse. On rung 1, make PB3 write Pulse through an R_TRIG box.
Try it yourself
{"v":1,"lang":"ld","tags":[{"name":"Pulse","type":"BOOL"}],"rungs":[{"els":[]},{"els":[{"t":"par","branches":[[{"t":"no","tag":"Pulse"},{"t":"nc","tag":"Blue"}],[{"t":"nc","tag":"Pulse"},{"t":"no","tag":"Blue"}]]},{"t":"coil","tag":"Blue"}]}]}This lesson includes a short quiz. Start the lesson to answer it and track your progress.
All lessons in Latches, Edges and Interlocks
Practice on your own: PLC playground