The Reset Coil
Part of the Latches, Edges and Interlocks section of Coddy's PLC Programming journey. Lesson 2 of 20.
A reset coil is the partner of the set coil. While its rung has power it writes FALSE, and without power it leaves the tag alone.
Together they make a latch from two rungs: one button turns the output on, another turns it off. Two plain coils on one tag fight each other, but a set and a reset coil on the same tag do not, because each one writes only while its rung has power.
Rockwell software calls the reset coil OTU (output unlatch).
Challenge
EasyRung 1 already sets Green from PB1. Add a rung where PB2 resets Green.
Try it yourself
{"v":1,"lang":"ld","tags":[],"rungs":[{"els":[{"t":"no","tag":"PB1"},{"t":"set","tag":"Green"}]},{"els":[]}]}All lessons in Latches, Edges and Interlocks
Practice on your own: PLC playground