Stop the Door
Part of the Latches, Edges and Interlocks section of Coddy's PLC Programming journey. Lesson 18 of 20.
Someone must be able to stop the door anywhere. Like every Stop button, the door's Stop is wired NC: TRUE at rest, FALSE while pressed, so a broken wire stops the door too.
It goes in series on both rungs, as a normally open contact, so it passes power while nobody presses it.
A press breaks both seal-ins, and the door stays where it is until Open or Close.
Challenge
EasyAdd Stop to both rungs, so a press stops the door wherever it is.
Try it yourself
{"v":1,"lang":"ld","tags":[],"rungs":[{"els":[{"t":"par","branches":[[{"t":"no","tag":"Open"}],[{"t":"no","tag":"MotorUp"}]]},{"t":"nc","tag":"UpLimit"},{"t":"nc","tag":"MotorDown"},{"t":"coil","tag":"MotorUp"}]},{"els":[{"t":"par","branches":[[{"t":"no","tag":"Close"}],[{"t":"no","tag":"MotorDown"}]]},{"t":"nc","tag":"DownLimit"},{"t":"nc","tag":"MotorUp"},{"t":"coil","tag":"MotorDown"}]}]}All lessons in Latches, Edges and Interlocks
4Project: Garage Door
The Door OpensThe Door ClosesThe Door InterlockStop the DoorThe Safety BeamThe Remote ButtonPractice on your own: PLC playground